Clutch X18 Mech Mod by Dovpo & Signature Tips
Signaute Tips, Dovpo and Mikes Vapes have come together again to produce a new bigger, better and safer Clutch mod, still featuring the same great ergonomic form factor and still with the super comfortable fire button, but this is where the similiarities end, the internals have been fully re-designed to provide a safer and easier mechanical mod experience.
Unlike previous Clutch mods the X18 is a Dual 18650 device set in parallel meaning twice the mAh and double the Amp rating on the batteries, still providing the 4.2v output but for longer as both batteries will now share the drain, not only is it now in dual 18650 mod but has a feature that is unheard of in mechanical mods... IT IS FUSED! a 37Amp fuse is integrated into the battery sled and will break the connection to the RDA if anything untoward starts happening such as coils shorting or the resistance is to low, based on the fuse this device will allow for coils with a resistance of 0.12 or greater, below this resistance than you are pushing greater amps than that of the fuse and it will blow, Mistakes do happen especially when pulsing coils, Dovpo Signature Tips and Mike vapes understand this and have provided extra fuses within the package which is a simple two turn screw operation to remove and replace does require a T5 Torx Screwdriver (Not Included)
If you wanted to push the limits however never recommeneded, simply replace the 37amp fuse with the solid fuse Bridge (Not Included) to remove all safety protections.... DO SO AT YOUR OWN RISK.
Keeping in line with safety, integrated into the side of the device below the door is a lock and unlock switch, this is to lock the fire button to stop accidental firing when not in use.
The Clutch X18 comes complete with 2 sets of doors, the thinner doors which will allow RDA's upto 24mm to sit ontop without any over hang and the thicker doors that will allow 28mm RDA's to sit flush.
- Hybrid 510 connection
- Solid Silver Contacts
- Unique Fire locking system
- Machined from solid billet Aluminium
- Dual 18650 in parallel
- Fused Protection
- Solid Fused Bridge (Sold Seperately)
- Fits Upto 28mm Atomizers
- Fine Shot blasted and anodized
- Commercial Grade 3D Printed Internal Sled
In the box:
- 1x Mike Vapes, Dovpo and Signature Mods Clut X18 Mechanical Mod
- 1x Thicker Door Set
- 1x Flathead Screw Driver
- 5x Spare Fuses